Security Door Assembly Video

1. Remove the security door by lifting and put the steel door frame in place.

2. Adjust the door frame to suit the opening by tightening the 6 bolts with 12mm Allen key.
When adjusting the door frame to suit your opening do not over tighten the Allen keys.

3. Drill through the centre of the Allen key bolts into the blockwork with a 10mm drill.

4.When fitting the security door frame make sure that it is fitted square and plum. (If the steel door frame is not square and plum the shot bolts in the steel door could jam in the frame.) Use 6 anchor bolts to fix the frame into place.

5. Place the steel door back onto its hinges. Check the gap around the door and frame is equal.

6. Fix the 2 screw connectors to the outside handle. Insert the spring into the spindle drive followed by the large shaft.

7. Fit the other spring and the smaller shaft to the inside handle. When fitting the security door furniture make sure the spindles are inserted correctly.

8. Secure the inside handle with the 2 screws. When fitting the door handles do not over tighten the screws (this could jam the lock).

Your security door is now fully installed and ready to use.